How Do You Take Out A Car Radio Without Keys
I want to improve my carâs sound system, but I donât have the keys I apparently need to do it. Is there any way to take out a car radio without the keys?
easier to take out your radio with a din tooltake out your car radio without keys
- Start by disconnecting the battery.
- On older vehicles, take off the plastic trim surrounding the radio by removing the screws holding it in place.
- For newer vehicles, slowly and carefully pry up the edges of the dashboard panel with a plastic card you donât need or a pry bar. Once all the edges are up, it should pop out of place!
- Now that the stereo is exposed, you should see fasteners on each side of the radio. Check your ownerâs manual to locate any hidden clips and learn how to safely remove them.
- After you take off the clips, slip your din tool, hangers, or wires in the cracks on either side of the radio.
- Use them to simultaneously undo the clips on each sideâyou should hear a click.
- Now your radio should slide out!
for free
Removal Of The Screws
Remove the top two screws, where the middle panel was. Remove, also, the bottom two screws. Catch the screws as they fall down so they wont fall down into the bottom. One screw on the right and one on the left. This will allow us to pull the cars stereo from the dash.
Pro Tip: Loosening the ScrewsFirst of all, before removing of the stereo, you should use the proper type of the screwdriver. There can be a couple of screws that are placed in crannies and nooks. Therefore, youll need to place all the screws in the container in order not to lose them or mix them with other nuts, bolts, and also screws. To do that, please utilize the container with magnetic features.
Recommended Reading: How To Get Sap Off Car
Remove The Screws And Lift The Mount
Gently loosen the screws taking the help of a screwdriver. These screws may have placed tightly on the antenna mount. Once you finish undoing, lift the mount off of the vehicle surface and look under the dashboard. You will then find the location where the antenna is mounted to the car. It is generally on the inside under the front passenger side of the vehicle.
Recommended Reading: Who Invented The Tesla Car
Remove Car Stereo With Professionally Manufactured Release Keys:
Professionally manufactured removal release keys are tools you can buy from car tool manufacturers. Some of these are available online. Find professionally manufactured keys on your car dealer partner stores. Buy generic removal release keys or release keys designed for your car stereo model.
If youre buying generic removal release keys, check the release slots on your car stereo. Find which type fits the slots at the corners of the outer panel of your car stereo.
If your car stereo has keyholes on the corners, you will need the round pin type removal release keys. If your car stereo has key apertures on the corners, you will need the flat pin type release keys.
Watch the Video showing how to remove a Ford car stereo:
Remove The Stereo Front Panel
After you have disconnected the battery, you can now remove the stereo front panel. There are usually clips or screws that hold it in place. Once you have removed the front panel, next remove the frame. Now, look for the mounting brackets that are holding the stereo in place. There are usually two brackets, one on each side of the stereo.
Also Check: How Much Is Car Shipping From State To Another
How To Remove A Car Stereo
Different car manufacturers make their car stereos so that they can be removed and replaced using particular steps. You need a key to remove Ford stereos, but you need other audio removal tools to remove other types of stereos. Ford uses a Ford DIN removal key to remove the stereo from the mounting deck.
There are some types of cars, such as Mazda, that dont use a key to remove the stereo unit. However, if you need to remove a car stereo and you dont have a key, there are steps that you can follow. Take a look at the following steps you will need to take.
How Much Does It Cost To Install A Car Stereo At Walmart
How Much Does Car Stereo Installation Cost At Walmart? You can get a standard stereo installed for roughly $64.99, and a subwoofer can be installed for $44.99. Advanced stereos that include Bluetooth and/or GPS, cost roughly $100 to install. The installation prices do not include the cost of the car stereo.
Don’t Miss: How Often Should You Change Your Oil In Your Car
Basic Types Of Car Radio Systems That Youll Encounter
Basically two types of car radio systems:
1. Factory car radio
These are made and designed together with the car making it a perfect match, be it a classical car stereo system or a modern infotainment one. Came with the car from the factory.
2. Aftermarket car stereo and infotainment systems
Built-in afterward for various reasons .
Make Your Own Head Unit Harness To Wire A Car Stereo
We bought a Pioneer AVIC-F700BT for around $150 because it was on sale. It lacked a preamp wire harness, as we recall. There are times when you discover a cheap car radio lacking several accessories . Youll need a wire harness if you do. We thought it might be beneficial to provide a how-to on creating your own.
Tools needed
To begin, youll need wire strippers, Tessa Tape, crimp caps, a Small Bundle of Zip Tires, and a handheld crimping tool.
Step 1: Its Time to Get Started
This is the port where well need a harness. It has 12 pins and connects the preamp outputs of the stereo to an external amplifier. If you bought this unit new, the harness would be included in the box.
The first step is to determine the pin-out diagram for each port so you know which pins control what feature. For any port you come across on Google, these items are readily available.
Step 2: Determining the Pin-out
I acquired this stereo diagram from a forum. Because Im creating my own harness, I have the option to eliminate certain features, which helps me save time during fabrication.
Here, Ill utilize the six audio channels, the amplifier remote cable, and the mute wire.
Im not paying attention to the rearview camera or video connections right now.
Step 3: The Connector
Step 4: Extend the Leads
Step 5: A/V Hookup
Youll need female A/V jacks now. Finding them in stores is difficult, so I hacked an old VCR open. Remove the wires from the inside of the machine.
Step 6: Secure the Connection
Recommended Reading: Where Can I Get My Car Registered
Three : Slide In The Key Alternatives
After removing the panel, the key slots will be exposed. But you don’t have the removal keys, right?
Well, there are some tools around your house that you can use as removal keys without any trouble. For instance, flathead screwdrivers and butter knives as alternatives.
So take your key alternatives and enter them into the key slots. You have to keep pushing the butter knives or the flathead screwdriver until you hear a click!
The stereo will be ready to pull out when you hear the confirmation noise.
Pulling Out The Stereo
Recommended Reading: What Is The Best Car Cover
What You Will Need To Follow This Tutorial
- A 10mm battery wrench
- Slotted screwdriver set
- A pair of knives/long flat-head screwdrivers
We need to mention here that this how to remove a car stereo without keys guide is not for any particular stereo or car make. Our step-by-step guide offers general guidelines that will come in handy for more or less all sorts of stock stereos.
How To Remove Car Stereo With Or Without Keys
You finally decide to install a new stereo for your car, but you have no idea how to remove the original car stereo with keys or without keys. You also worry that you might cut the wires that connect to the battery and speakers.
You are torn between consulting an expert technician or just do the task yourself. You are confident with handling wires and screws, so it should not be a problem. Plus, you have your tools ready in the garage.
If you have decided that you can do it yourself, check your tools at hand and prepare them.
Recommended Reading: How To Reupholster Car Seats
Unscrew/unfasten The Stereo System
After removing the front dash panels, you will be able to see the stereo system fixed in its mounting bracket from both sides through slotted screws.
Usually, one uses any slotted screwdriver to unscrew the stereo from its mounting bracket. However, thats not the case with car stereo with keys. They are essentially stuck or wedged in their docking stations.
If the stereo system is not fastened to the bracket through screws, you will need two flat and sharp objects to remove the stereo or you can use this trim tool kitthat comes with 6 stereo removal tools.
Slide the sharp objects between the two ends of the stereo and the dashboard. Then, pull the sharp objects out while exerting force on the stereo as if youre holding them through those sharp objects.
This procedure will push the front of the stereo out that you can then easily pull out with your hands.
How Do You Remove Car Speakers
We summarized here some simple steps you should do to remove your car speakers:
- Before removing any speakers or disconnecting any electronics, unplug the wire from the negative battery terminal
- Remove the trim pieces from the inner door panels to remove door speakers
- Remove any remaining door trim components
- Remove the speakers from the door by unscrewing the screws that hold the speakers in place
Don’t Miss: How To Repair A Car Cigarette Lighter Socket
How Do You Remove A Ford Radio Without The Tool
There are a few ways to remove a Ford radio without the special removal tool. One way is to use a putty knife or other thin, flat object to gently pry the faceplate of the radio off. Once the faceplate is removed, you should be able to see and access the wire harnesses that connect the radio to the rest of the cars electrical system. You can then disconnect these harnesses and remove the radio.
Another way to remove a Ford radio without the special tool is to use a pair of needle-nose pliers to reach in and release the retaining clips that hold the radio in place. Once the retaining clips are released, you should be able to pull the radio out of the dash.
If youre still having trouble removing the radio, you can consult your Fords owners manual or a professional mechanic for assistance.
How To Install A Car Stereo Without A Wiring Harness Adapter
Learning how to install a car stereo without a wiring harness adapter is very strait forward if you have the proper tools handy for the job! Your main goal is to install a new stereo into your vehicle while not damaging important wires or causing any automotive fires in the process.
Ive decided to create a step by step guide for this, it will be pretty quick and easy to understand hopefully. Ill list the tools that I recommend having handy for this job below as well.
You May Like: Is The Chevy Spark An Electric Car
How To Install A Car Radio With Wiring Harness
The wire harness is essentially a plastic plug that consolidates all of the cables needed for the proper functioning of a car radio .
There can be one or multiple wiring harness connectors coming from the car installation.
The purpose of these connectors is to make the car radio a plug-in appliance making life easier when installing, removing, or replacing the car radio.
Also, thanks to standardizing, almost all wiring harnesses are compatible with every car radio.
For instance, if you buy any kind of aftermarket car radio, there is a good possibility that it will fit the installation on your car. How good is that?
Even if it doesnt , you can change the pins inside the harness and solve the problem.
To get back to the procedure:
1. Connect the new car radio. Take a look, just in case, that the harness is the same and that it fits into the slot of the radio. Dont worry, the plastic plug has such a shape that it can be connected in just one way so you cant make a mistake.
2. Connect the other installation .
3. Before inserting the radio back into place, return the power and try the radio out. See that everything works. This way, if somethings wrong, you can check it out and avoid another removal.
4. Insert the wire harness into the hole in the console, sort of tuck in the wiring loom. Make sure that the harness will not be pinched or damaged.
5. Insert the radio back in place.
7. Turn on the car radio and see, again if everything is OK.
Pulling The Stereo Out
On the back of the stereo, there are usually wires. Hence, if you want to avoid paying for new cables, slowly pull the stereo out of the mounting bracket to reveal its rear. However, instead of putting stress on the wires, release them from their binder.
Next, remove the stereo from its mounting bracket, replace it, and reverse the procedures to install the vehicle stereo without the keys.
Read Also: How To Wash Car With Pressure Washer
Arrange Radio Keys In The Slot:
Place radio keys in the slots on the stereos left and right sides. Radio keys are little flat tools used to remove the clips that keep the stereo in place. They may come standard with your vehicle, or you can purchase them separately from an auto parts store. Place a key in each of the stereo slots on each side. To disengage the stereo, you must press both keys at the same time.
If you dont have any radio keys, any flat metal item that fits into the radio slots will suffice. Thin knives, files, and hangers are among the options.
How To Install Car Radio Without Wiring Harness
As mentioned, most car electric installations have a built-in wiring harness for connecting the car radio.
But because of various situations , the wire harness may be missing.
Youll find yourself in a situation where you simply dont have a plug for the car radio.
But there is a solution to this:
- If you have a radio with a standard slot for a wiring harness connector, go to your local car parts shop and buy a new wire harness connector that fits.
Your task will be to connect the harness to the car installation making a plug-in connection of your own
- If you have a radio without a wire harness connection , directly connect the radio wires to the car installation .
Mostly, when you buy a new car radio it will have included the wiring harness connector, with used ones youre probably going to have to visit the car parts shop.
So, once youve solved the missing wiring harness connector problem, youre good to go on connecting it to the car installation.
To resume on this part: youre connecting the wire harness connector to the installation, not the car radio. Imagine this as installing an electric plug on a home appliance. Simple as that.
The car radio is plugged in afterward.
Before you start, have in mind that the car installation should have all of the needed elements .
Your job is to merge that installation with the new wiring harness connector.
The color of the wires is standardized on most cars so this should also help you.
Heres the procedure:
2.
Recommended Reading: Can You Get Wifi In Your Car
