What To Do If You Dont Have An Aux Port In Your Car
One thing that people are often confused about is what should you do if there is no AUX Port in your car? Well, heres the answer. In cars and radios without auxiliary inputs, an FM transmitter would be the best alternative.
FM transmitters of today are similar to Bluetooth receivers, except they broadcast the audio over an open FM frequency instead of using an auxiliary cable to connect to a stereo.
Connect Via Usb Input Jack
If your car is newer, it may also be equipped with a USB input jack in your cars factory radio system. If this is the case, you can simply plug in your iPod or iPhones charger or lightning cable into your cars factory radio USB input.
Step 1: Connect USB cable. Use a USB charging cord to connect your smartphone to your cars factory USB input.
In most cases, this method will allow information from your device to be displayed on your cars factory radio display. You may even be able to charge your device directly through the USB input.
- Note: Again, be sure to bring your device to full volume, allowing maximum control through the vehicles interface.
How To Connect An Ipod To Your Car Stereo
Back in the day, having a car meant constantly having to organize its interior, or, more specifically, reuniting errant cassette tapes with their matching plastic cases. As time marched on, cassettes gave way to compact discs. Multi-disc magazines helped reduce the clutter, but the musical selection in your car was still limited to a few hundred songs, at most.
Then MP3 players like the iPod came along, and the inner space of music lovers everywhere was forever transformed. By donning a pair of white earbuds, people can drown out the outside world to a personally customized soundtrack. Wouldn’t you know it — that’s what we do when we get in the car and crank up the stereo! It was inevitable that iPod lovers would figure out ways to connect their beloved gadget to their vehicles’ sound system.
For many, spending lots of time in transit is a fact of life: Whether you’re an on-the-go student, a commuting office worker or a salesperson with lots of territory to cover, it’s easy to spend huge chunks of time behind the wheel. If this is the case, wouldn’t it be great to have access to thousands of your favorite songs, recorded talks and archived broadcasts? Wouldn’t it be great to stop worrying about burning these selections permanently to compact disc just so that you could ferry that CD to your car? Wouldn’t you like to stop hoping your burned CDs don’t somehow get lost, scratched or rejected by your car CD player as unreadable?
Don’t Miss: How To Fill Out A Title When Selling A Car
For Reliability: Play Music Using An Auxiliary Cord
Most modern cars feature a 3.5mm auxiliary jack, either on the stereo unit or underneath it. This allows you to plug in a cable from your device’s headphone port directly into your stereo. From there, simply play any audio on your phone that you’d like to hear through your car.
Auxiliary audio will sound clearer than both the cassette and FM transmitter options. Of course, this won’t work if your device doesn’t have a 3.5mm headphone jack. But if both your car and phone have a stereo jack, it’s a simple way to play audio without any fuss, as long as you don’t mind a wire.
If you don’t have an auxiliary cord yet, Anker’s auxiliary audio cable should serve you well. Just remember that playing music through an AUX cord is not a “smart” method, so you’ll have to change the track and make similar changes on your device. You can’t use the controls on your car stereo or steering wheel with an auxiliary cord.
How Can I Play Music In My Car Without An Aux
If you do not want to listen to music from your phone while driving, you can use a Bluetooth adapter to play audio from your phone on your car radio. You can get one with 3.5mm male plugs for your phone by connecting it to the headphone jack of your phone via the AUX port of your car stereo.
Play music in your car with an FM transmitter, an audio cassette adapter, a USB input, or a Bluetooth app. It may not be perfect, but they are a great way to listen to your favorite music on your phone without having to listen to it in any other way. In the United States, a low-power FM transmitter like the one shown above is perfectly legal. If you have an old car with a cassette tape player, you can listen to audio using the aux adapter of an old car audio cassette. A Bluetooth cassette receiver can also be purchased separately. Using a USB port on your phone, you can connect it to your stereo and play music.
Read Also: When Do Car Dealerships Have Sales
Psa: Dont Use Your Phone When Driving
Although were discussing the use of a smartphone while driving, it is important to understand just what this means. While youre not making calls or texting, the device is still running. As such, taking your hand off the wheel and eyes off the road to change track, find a new radio station, switch audiobook chapters, or load a new podcast is dangerous. Its even illegal in many areas, just like taking a call or texting.
You should not do anything that distracts you from actually driving.
Wherever the phone is while driving, dont touch it. If you need to make a change to the music, you should either:
- Rely on one of the passengers .
- Use steering wheel mounted controls, if available.
- Find a safe place to pull over and make the changes.
For the safest experience, however, just leave the music alone until its time to stop. If worse comes to worst, you could switch to broadcast radio.
What Are Some Other Way To Put Aux In Car Stereo
There are 3 methods to do it. One way is to use an aux cord with a standard 3.5mm jack. You can also use Bluetooth adapater. Finally, you can use an FM transmitter. Each of these methods has its own pros and cons, so choose the one that best suits your needs.
If youre using an aux cord, simply plug it into the aux port on your car stereo. If your car doesnt have an aux port, you can use a Bluetooth adapter. Simply pair the adapter with your phone and then plug it into the cigarette lighter port.
Once its plugged in, you should be able to play music from your phone through the car stereo. If you dont have Bluetooth in your car, you can use an FM transmitter.
Simply tune the transmitter to an unused FM frequency and then plug it into the cigarette lighter port. You should then be able to play music from your phone through the car stereo.
I am Miles Walker, founder of CarAudioWise.com. I’m a car audio enthusiast who loves to help others learn about car audio and installation.
Home»Blog»How to install Aux input in Car Stereo
Don’t Miss: How To Find The Value Of Your Car
Connect Via Cd Changer Or Satellite Radio Adapters
If you want information from your iPod or iPhone to be displayed directly onto your vehicles radio display – and if your vehicle is equipped with either a CD changer input or satellite radio antenna input, you should consider this option.
Step 1: Refer to your car manual. Refer to your car manual before shopping to ensure you purchase the right type of adapter.
The type of stereo iPod adapter you get will depend on your cars make and model, and its best to consult your manual to make the best choice.
Step 2: Replace factory radio with iPod adapter. Remove your vehicles factory radio and install an iPod adapter in its place.
Step 3: Adjust the settings on your radio panel. You should be able to modify the volume of your iPods music by adjusting the settings on your radio panel.
As an added benefit, in most cases you can even charge your iPod or iPhone using these adapters.
-
Note: These type of adapters require either a CD changer input or a satellite radio antenna input.
-
Warning: Remember to disconnect your cars battery when uninstalling or installing the adapters to your cars factory radio to ensure everyones safety. Working with connecting and plugging in cables while your car battery is running puts you at risk for electric shocks and electrical shorts.
Two: Dock Connector Fm Transmitter
Compatibility:
This type of FM Transmitter is essentially the same as the one above, but instead of connecting to your iPod using the headphone socket, it uses Apples Dock Connector. This means that the audio quality is slightly better and you wont need to keep buying batteries as it draws the small amount of power that it needs from your iPod.
Belkin TuneFM3 FM Transmitter for iPod
Like the one listed above it has memory pre-sets that you can use to store the frequencies of the clearest stations and you can easily switch between them using the buttons on the front of the transmitter and the white on black display makes it easy to use at night.
Also Check: What Is A Ricer Car
Establish Connection Via Cd Changer Or Satellite Radio Adapters
Suppose you want information from your iPod or iPhone to be displayed directly onto your vehicles radio display. And if your car is equipped with either a CD changer input or satellite radio antenna input, you should consider this option.
Refer to your car manual before shopping to ensure you purchase the correct type of adapter.
The type of stereo iPod adapter you get will depend on your cars make and model, and its best to consult your manual to make the best choice.
Can You Plug A Usb Drive Into A Usb
When you put music on a USB flash drive, phone, or any other storage media, it is stored as a digital file. The file is usually compressed in an MP3, AAC, OGG, or another format unless you buy high-resolution digital music.
To listen to those files, you need a program, app, or firmware capable of reading the data and converting it into an analog signal that can be used to drive headphones or speakers. Whether its software on a computer, phone, MP3 player, or the head unit in your car, the process is essentially the same.
In the case of a USB flash drive, you have a passive storage media that holds song data, but it cant do anything with that data. When you plug the drive in the USB connection of a compatible head unit or infotainment system, the head unit accesses it just like a computer would. The head unit reads data from the drive and can play the songs because it has the right firmware or software.
Nothing happens when you plug a USB flash drive into a USB-to-aux cable and plug the cable into an aux port on a head unit. The thumb drive cant output an audio signal, and the aux input on the head unit cant read the digital information stored on the drive.
Read Also: How Much Horsepower Does The Average Car Have
Also Check: How To Get The Cigarette Smell Out Of Your Car
How Can I Connect My Phone To My Car Without Bluetooth
Just find a radio station that isnt offering any sound and the transmitter will allow you to listen to your own tunes or podcasts on that frequency. Some FM transmitters will require that your phone has Bluetooth, but others will connect via a 3.5mm AUX cable that plugs in right where your headphones do.
How To Connect Phone To Car Radio Without Bluetooth Or Aux
If your car radio does not have Bluetooth or an aux input, you can still connect your phone to play music through the radio. One option is to use an FM transmitter. This device plugs into your phones headphone jack and broadcasts an FM signal that can be picked up by your car radio. You tune the transmitter to an unused FM frequency and set your car radio to the same frequency. The audio from your phone will play through your car radio speakers.
Another option is to use a cassette adapter. This plugs into your phones headphone jack and inserts into your cars cassette player. The audio from your phone will play through your car radio speakers.
You can also connect your phone to your car radio using a wired connection. Some phones have a special port for connecting to a car stereo, such as a mini USB port or an auxiliary input. If your phone does not have one of these ports, you can use an adapter that will plug into your phones headphone jack and connect to the AUX input on your car stereo. Or, you can use a Bluetooth adapter that plugs into your cars AUX input and connects wirelessly to your phone.
Whichever method you choose, make sure you follow the instructions that come with the device for best results.
Read Also: How To Get Deep Scratches Out Of Car
Connecting Via A 35mm Fm Transmitter
This is one of the easiest ways to listen to your iPods playlist through your cars stereo. The first thing you want to do is plug the car stereos FM transmitter into your iPods headphone socket.
Tune the car stereo into a different frequency from the one that is playing on the radio station then set the car transmitter to this very frequency.
At this point, your music will be transmitted to the stereo.
Transmitters typically come with programmable slots that allow you to save clear stations. This way, the music comes out clearly regardless of the location youre in.
Find The Choice That Works Best For Your Budget And Your Ears
So, when you finally find the option that suits your car, turn it up and enjoy. Of course, you might be ready to look for a more current used car one that has more of the amenities of todays cars, trucks and SUVs. We here at Auto Credit Express are here to help you get into that sweet ride you are looking for. Even if you have bad credit, we have a large network of bad credit auto dealers who are just waiting to sell you a vehicle. Get started today, by filling out our online application.
You May Like: How To Add Carplay To My Car
Android Auto And Apple Carplay
These days many cars come with Apples CarPlay and Googles Android Auto apps.
These apps can link up your phone to the head unit of your car to play music from your phone.
With this feature you can even display your phone screen straight away view navigation maps send messages, and many more.
They are not supported in all cars. But they are great features to have if your car model supports these apps.
You can also integrate your voice using Google Assistant and Siri which is fantastic.
If your car lacks these features, you can utilize the Android Auto on the screen of your phone.
Link up with a USB cable you can get similar sound quality. However, currently there is no such feature for Apple phones.
Connect Via Dvd A/v Cable Connection
If your car is equipped with a rear cabin DVD entertainment system connected to the factory radio, you can buy an A/V cable set to connect your iPod to the cars stereo, allowing you to make use of existing hardware in your car.
Materials Needed
Step 1: Install A/V Connection. Plug the two audio cables into the rear DVD entertainment systems A/V input jacks.
-
Note: Refer to your vehicles manual to locate these inputs, as they vary between makes and models.
-
Tip: Again, turn up the volume on device to fully interact with car radio interface.
Recommended Reading: How To Sell A Broken Car
How Can I Play Music In My Car Without An Aux Port
If your car doesnt have an AUX port, you can still play music from your phone or another device by using a Bluetooth adapter. You can connect the Bluetooth adapter to your cars stereo system and then pair it with your phone. Once its paired, youll be able to stream music from your phone to your cars speakers.
How Do I Connect Ipod To Car Stereo Without Aux
Cassette adapters offer the easiest and inexpensive way to connect your iPod to the car header unit if it doesnt have 3.5mm aux input. For mechless stereo systems, you can use FM modulators, RCA adapters, and Bluetooth adapters to connect iPods to car stereos.
It is now pretty common to use personal gadgets as the input for car stereo. And there is no personal music player more popular than iPod. If your car stereo comes with a built-in 3.5mm Aux jack, you just need to plug it in the iPod and stream your playlist on the powerful and high-fidelity sound system of your car.
But what if there is no 3.5 aux jack in your stereo or car? No worries, you can still connect your iPod.
In this guide, we will discuss different methods of how to connect an iPod to the car stereo without an aux.
Read Also: What To Do If You’re In A Car Accident
